This post assumes you are looking at the captive portal or the local admin interface. Deconstructing the att Handshake: The Quirks of hotspot.webui Authentication
Hard refresh (Ctrl+Shift+R) or clear the 192.168.1.1 cache. 4. The AT&T "SOS" Mode (Login Loop) A specific AT&T firmware bug (seen in M1 firmware 12.06.16.00 and later) causes a login loop when the device has a weak cellular signal (-111 dBm or worse).
Disconnect the device from power, pull the battery (if removable), boot without a SIM card, log in (you will get "No SIM"), disable "Automatic Cellular Refresh" or "Band Scanning," reinsert the SIM. 5. API Bypass for Scripting (curl) If you need to automate this (e.g., reboot the hotspot via cron because AT&T drops the carrier aggregation), do not scrape HTML. Use the raw JSON API that the web UI calls.
If you manage AT&T mobile broadband devices (Nighthawk M1/M6/MR series, Netgear LM1200, or the older Unite hotspots), you have likely stared at the http://hotspot.webui or 192.168.1.1 endpoint.
Hotspot.webui Login Att !!top!! -
This post assumes you are looking at the captive portal or the local admin interface. Deconstructing the att Handshake: The Quirks of hotspot.webui Authentication
Hard refresh (Ctrl+Shift+R) or clear the 192.168.1.1 cache. 4. The AT&T "SOS" Mode (Login Loop) A specific AT&T firmware bug (seen in M1 firmware 12.06.16.00 and later) causes a login loop when the device has a weak cellular signal (-111 dBm or worse).
Disconnect the device from power, pull the battery (if removable), boot without a SIM card, log in (you will get "No SIM"), disable "Automatic Cellular Refresh" or "Band Scanning," reinsert the SIM. 5. API Bypass for Scripting (curl) If you need to automate this (e.g., reboot the hotspot via cron because AT&T drops the carrier aggregation), do not scrape HTML. Use the raw JSON API that the web UI calls.
If you manage AT&T mobile broadband devices (Nighthawk M1/M6/MR series, Netgear LM1200, or the older Unite hotspots), you have likely stared at the http://hotspot.webui or 192.168.1.1 endpoint.
